- Push Button Switches[5]
- Other Electrical Equipment[6]
- Temperature Instruments[10]
- Instrumentation Cables[1]
- Electrical Wires[1]
- Power Distribution Equipment[10]
- Metal Building Materials[3]
- Electrical Plugs & Sockets[10]
- Circuit Breakers[10]
- Flow Meters[10]
- Other Measuring & Analysing Instruments[1]
- Current Meters[1]
- Car Black Box[1]
- Other Electronic Measuring Instruments[2]
- Connectors[7]
- Pipe Fittings[3]
- Other Switches[10]
- Voltage Regulators/Stabilizers[7]
- Integrated Circuits[2]
- Inverters & Converters[3]
- Other Lights & Lighting Products[2]
- Relays[10]
- Counters[5]
- Timers[2]
- Acoustic Components[4]
- Sensors[1]
- Electric Heater Parts[1]
- Limit Switches[1]
- Pressure Transmitters[4]
- Testing Equipment[1]
- Contact Person : Mr. Yuan longzhu
- Company Name : Qingdao Sico Electric Equipment Co., Ltd.
- Tel : 86-532-83028251
- Fax : 86-532-83028251
- Address : Shandong,Qingdao,No.20 Renmin Road Qingdao China
- Country/Region : China
thermocouple wire
Thermocouple Wire
Specifications
Positive leg(KP leg) is universally known as NiCr10 or ChromelNegative leg (KN leg) is universally known as Alumel or NiAlCo
Number | Model | Name | Positive | Negative | ||
S | SC | Cu-CuNi0.6 | Cu | SPC | CuNi0.6 | SNC |
R | RC | Cu-CuNi0.6 | Cu | RPC | CuNi0.6 | RNC |
K | KCA | Fe-CuNi22 | Fe | KPCA | CuNi22 | KNCA |
K | KCB | Cu-CuNi40 | Cu | KPCB | CuNi40 | KNCB |
K | KX | NiCr10-Si3 | NiCr10 | KPX | NiSi3 | KNX |
N | NC | Fe-CuNi18 | Fe | NPC | CuNi18 | NNC |
N | NX | NiCr14-NiSi4 | NiCR14 | NPX | NiSi4 | NNX |
E | EX | NiCr10-CuNi45 | NiCr10 | EPX | CuNi45 | ENX |
J | JX | Fe-CuNi45 | Fe | JPX | CuNi45 | JNX |
T | TX | Cu-CuNi45 | Cu | TPX | CuNi45 | TNX |
WC3-WRC25 | WC3/25 | tungsten-rhenium 3-tungsten-rhenium 25 | tungsten-rhenium 3 | WPC3/25 | tungsten-rhenium 25 | WNC3/25 |
A thermocouple is a temperature measuring device consisting of two conductors of dissimilar metals or alloys that are connected only at the ends. When the ends are at different temperatures a small voltage is produced in the wire that can be related directly to the temperature difference between the ends. If the temperature at one end is known, the temperature at the other end can be determined.Thermocouple wire or extension grade wire is recommended to be used to connect thermocouples to the sensing or control instrumentation. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response, and service life should be considered.Calibration Type CharacteristicsTYPE J (Iron vs Constantan) is used in vacuum, oxidizing, inert or reducing atmospheres. Iron element oxidizes rapidly at temperatures exceeding 538'C, and therefore heavier gauge wire is recommended for longer life at these temperatures.TYPE K (CHROMEL vs ALUMEL ) is used in oxidizing, inert or dry reducing atmospheres. Exposure to vacuum limited to short time periods. Must be protected from sulfurous and marginally oxidizing atmospheres. Reliable and accurate at high temperatures.TYPE T (Copper vs Constantan) is used or service in oxidizing, inert or reducing atmospheres or in vacuum. It is highly resistant to corrosion from atmospheric moisture and condensation and exhibits high stability at low temperatures. It is the only type with limits of error guaranteed for cryogenic temperatures.TYPE E (CHROMEL vs Constantan) may be used in oxidizing, inert or dry reducing atmospheres, or for short periods of time under vacuum. Must be protected from sulfurous and marginally oxidizingatmospheres. Produces the highest EMF per degree o any standardized thermocouple.
If you are interested in our company and products, please dont hesitate to contact Ms.Amy Yin
yinamy9@gmail [dot]com AND sikeqd@126 [dot] com
thermocouple wire